Tascione

Posted: **Mon Jul 16, 2012 10:14 am**

Hi guys,

first ships bell movement for me,

: DSCN2795_01.JPG (44.96 KiB) Viewed 3402 times

I am not sure if this is a worn hammer tail or not, it almost looks like it is supposed to be this way :roll:

but if I were looking at some other movement I would think it is worn. so before I make a new one I would like your input. thank you all, have a great day. William

: DSCN2791_01.JPG (30.2 KiB) Viewed 3402 times

: DSCN2792_01.JPG (26.79 KiB) Viewed 3402 times

Posted: **Mon Jul 16, 2012 12:19 pm**

Well......... I took the old one out. used a rod of pinion wire, softened it and smashed the tip to resemble the original. filed it flat and square put a 45 degree bevel on the drop side, tested in the movement, riveted to the arbor, hardened as bob shows in his video, polished..looks like it will work and I now think that my question was a little dense :oops:

but, oh well, need to live and learn

......Thanks guys for letting me use up your time. William

Posted: **Wed Jul 18, 2012 9:31 am**

Hi William,
Yes that's worn. Let us know how the new one works out.

Bob

Tascione

Seth Thomas ships Bell hammer tail

Seth Thomas ships Bell hammer tail

Re: Seth Thomas ships Bell hammer tail

Re: Seth Thomas ships Bell hammer tail