Tascione

Here is part 2 about fabricating multi tooth cutters for clocks. In part 2 I am going to show my process for grinding the radius on the form tool with a grinding jig I made for my lathe. The radius is critical, the jig makes it easy to achieve this radius.
Have fun, William


This will be a multiple video series about my process in making these cutters.
I hope you enjoy, ideas are always welcome.


BACK TO FORUM INDEX PAGE: http://clockrepairtips.com/forum/index.php





BACK TO FORUM INDEX PAGE: http://clockrepairtips.com/forum/index.php

Hi William,
You may already know this but try setting your cutoff tool slightly above center and use constant feed. In my years as a tool maker I have found if your cutting air hardening tool steel, A2 D2 and so on I don't go over 200 rpm and .002 IPR. I also use cutting fluid designed for tapping and use a lot with an acid brush works great on small work. When cutting oil hardening steel, 4140 O1 ect. I cut at no more than 150 and .002 IPM. Try this and see how it works. Thanks for the video's and good luck with your projects.

Thanks William!
Looking forward to see the rest!

Jan

Thanks Jan, in the next video I debated on how far to get into the math.....It would take me days to explain. It also may be best to address the finer points when actually designing and or cutting a true wheel or pinion. Stay tuned. Oh, and don't be shy to get involved in those particular parts, you are probably able to explain those things better than I can.
Kevin, thank you for the advice I really appreciate it, I will try everything you mentioned. Do you think it is possible to have the rpm TOO SLOW? In back gear I can get down to 28rpm. Having the tool bit "just above" center would help me, one thing that I do have happen is the tool bit getting jammed up under the work piece (not fun), yes this can be from wear in my cross slide and such but I am thinking I can adjust for that with your suggestion. Have a great day, William

Thanks William
Excellent!
Looking forward to the next post and hopefully video.

Peter

Hey Peter, thank you for the reply, I love your forum name.....say, I think I walk by your picture when I come into the shop. Is this you??? or is it Bob??

DSCN3747_01.JPG (22.03 KiB) Viewed 21529 times

Well William Bob has the beard but I have the years --- many more years than Bob I think so regrettably that would be me.

Peter

That's funny Peter, but just so you know.....I am catching up to you guys real fast.
Keep an eye out for Parts 3 and 4 on this process, coming soon. Have a great day, William

William
I see this is a old post but this might be a little bit of help to cut the small disc. This fella made a plate that sets on the chuck and you can place the disc in the same place everytime. Take a look at this video, I think you might get some good ideas.
https://www.youtube.com/watch?v=CJ0fs9zknQk

Buy the way I love all of what you have done and I'll be watching
Nelson Collar

Hey Nelson, I bought some machinable step collets for the lathe, they work great, Thanks, William

William
I just seen this and thought it might help you out with your cutting wheels. I watched a video long time ago and can not remember where it is but here is the gear set up.
http://mb.nawcc.org/showthread.php?1245 ... utting-Set

How is you gear cutting along?
Nelson

Hey Nelson, yes I have seen that, I like his videos..... The process I have shown and the formulas have proven to be accurate many times over and I have used them to create the cutters for clock restorations. I am currently "scrounging" for used manufactured cutters and plan on buying a range of them new for a clock build and to be able to offer a clock wheel cutting service for other clock repairers. Pretty busy getting all my ducks in a row for that.... though I have cut a few wheels for other people recently. Have a great day, William