by willofiam » Tue Jun 12, 2012 7:50 am
Hi Phil, I know just where you are coming from as I have recently opened the doors to my own clock repair service, I Have had 2 other businesses for the last 20 years and have acquired some of that business knowledge. The best advice I have is first get a hold of Bob and get on his mailing list for starting up a business, He has some great things to look at and think about. I started by buying 14 clocks and thoroughly going thru each one, buying several books and reading as much material as possible, I then picked up most of the tools I thought I would need with a lot of advice from guys on this forum and came up with a pretty good start, becoming involved in problem solving on this forum has been a great educational tool for me, after that I made the decision to move towards making a business out of it, this required a lot of thought and prayer as I knew I would have to put all my effort and as much time into it as I could knowing this would move me from my other business towards this, at the same time not shorting myself financially, (listening to response from above and my wife who tends to have super ideas) I then mentioned what I was doing to friends of mine and came up with 3 clocks that needed fixin, since they were friends I felt they wold be more forgiving if I was unable to accomplish the task properly and being honest and up front with them I was more at ease, halleluiah everything worked out good and I made a couple a bucks. There can be alot of pressure when working on a strangers clock or watch especially something very valuable or intricate. Time and experience will help with this but it is easy to get into a bad position, be careful about it and dont be afraid to be honest and say no or maybe later. I was able to find several clock guys who either retired, were getting there or were just working on clocks in their spare time, started a relationship with them, asking for some backing from them if I was unable figure something out, (my experience is that they were more than happy to share their experience and be there if needed) Remember most of these clocks or watches have meaning to their owners, it is a great responsibility and honor to be trusted with such items of personal value. I would think most states in the US have starting small business resources and can be valuable in that area. In a nutshell you are right, even here all I hear from people is there needs to be a watch guy or even just a pocket watch guy, (I am not brave enough for that at this point) and money can be made, pricing is something you will have to investigate in you area, I have found this the most difficult but time has helped and I have adjusted accordingly, ( i even did a couple of jobs free for the word of mouth advertising) I think there is a good process to go thru no matter how long or short it may take. I made business cards and handed them out to anyone who would take one, set up a booth at a local antique store displaying refurbished clocks, and 3 newspapers wrote stories on this new business (thanks to my wife's help), (if anyone desires to see the article it was in the Rochester Minnesota Post-Bulletin on May 5 2012) Its been placed upon your heart for some reason, now just allowing God to direct your path and dedicating yourself will dictate your successes. Dont forget to have fun with it and soon you will be the watch guy. That is my advice and experience, William
Have a great day, William